Programming 1. Turn ignition ON . 2. Left display " ", right display " ". 3. Turn ignition OFF . 4. Press and turn ignition ON simultaneously: flashes in left side of display window (value 1). Right side of display window: (e.g.) " ". 5. Press the right temperature selector (blue = <; red = >) in order to select desired value (refer to table on next page). 6. To enter value 1, Press > 1sec. 7. To access value 2, press : flashes in left side of display window (value 2). Right side of display window: (e.g.) " ". 8. Press the right temperature selector (blue = <; red = > ) in order to select desired value (refer to table on next page). 9. To enter (value 2) press > 1sec. 10. Turn ignition OFF: A/C returns to normal operation. 11. Reset right and left temperature selectors to normal settings.
		P83.40-0304-01

1. Numerical Value	1)	Preliminary setting
		new, not yet programmed A/C pushbutton control module
		Model 140 (as of MY 1997)
		° F displayed (up to MY 1997)
		°C displayed (up to MY 1997)
		Serial interface K1 and K2 programmed (as of MY 1997)
2. Numerical Value	1)	Engine version
		M 104 (up to MY 1997)
		M 119 (up to MY 1997)
		M 120 (up to MY 1997)
		OM 603 (up to MY 1997)
to the engine version		Blower motor bar graph switched on in mode
to the engine version		display readout switched off

1) Version coding menu.