Preliminary work: Diagnosis - Function Test 11 PSE/CL

Preparation for Test 1. Check fuse F4-3, 11. 2. Battery voltage 11 - 14 V. 3. Vehicle unlocked. 4. All doors and trunk lid closed. 5. Window on driver's door open.

Test step/Test scope	Test condition	Nominal value	Possible cause/Remedy 1)
1.0 Activate immobilization	Lock vehicle from one of the three locks. Try to start engine.	Starter motor does not turn. Engine does not start.	23 8.0, Wiring, Starter lock-out relay module (K38).
2.0 Deactivate immobilization	Unlock vehicle. Try to start engine.	Starter motor turns. Engine starts.	23 8.0, Wiring, Circuit 15 Circuit 50 Starter lock-out relay module (K38), Ignition/starter switch (S2/1) 2), Glow/starter switch (S2/2) 3), Starter (M1).

1) Observe Preparation for Test, see 22. 2) Vehicles with gasoline engine. 3) Vehicles with diesel engine.