Diagnostic Manual, Body and Accessories,
Volume 6
Diagnosis - Function Test
Preparation for Test:
1. Review  21, 22,
2. Review electrical diagrams:
PE68.00-P-1100D (Model 163)
PE68.00-P-1100C (Model 170)
PE68.00-P-1100B (Models 202, 208)
PE68.00-P-1100A (Model 210)
PE68.00-P-1100SA (Model 220)
For Model 129, see ETM, Vol. 2, Group 68,
3. Review section 0,
4. Fuses are OK,
5. Battery voltage: 11 - 14 V
6. Ignition: ON |
| Test step/Test scope |
Test condition |
Nominal value |
Possible cause/Remedy 1) |
| 1.0 Transmitter pushbuttons |
The transmitter pushbuttons are pre-programmed.
The vehicle is located within the range of the garage door receiver.
The signal of the garage door receiver is 85% of that of the transmitter, but at least approx. 45 feet.
Press transmitter pushbutton: |
Garage door is opened. |
13 |
| 1) Observe Preparation for Test, see 22. |
|
Printable version
