STI Home
Diagnostic Manual, Engines, Volume 1

 Printable version
LOCATION:    A CFI Test and Adjustment Data    >   16 Engine 102.985 CFI up to 08/88


Engine 102.985 CFI up to 08/88

Engine 102.985 up to 1986 102.985 from 1987
CFI system designation 3 3
On-off ratio/DTC readout (CFI)
On-off ratio readout with ignition: ON
Engine coolant temperature >80°C %
Engine coolant temperature <70°C %



50
30


50
30
Current at EHA
Ignition: ON mA
After start enrichment and warmup
After start enrichment at +20 °C engine coolant temperature mA
Warmup base value at+20°C engine coolant temperature mA
Engine coolant temperature +80°C mA
Enrichment during acceleration and at
+20°C engine coolant temperature mA
Engine at operating temperature
Part load mixture correction mA
Wide open throttle enrichment at 2000 rpm mA
Deceleration fuel shut off approx. mA

-

13 - 19
3 - 9
0±3

>15

readout oscillates
8 - 11
-60

20

13 - 19
3 - 9
0±3

>15

readout oscillates
7 - 9
-60

Engine 102.985
CFI system designation 3
Ignition timing and dwell
Closed throttle (idle) speed rpm
Ignition timing with vacuum BTDC

Engine speed rpm
Ignition timing with vacuum BTDC
Ignition timing without vacuum BTDC
Dwell °
Dwell %

700 - 800 4)
8 - 12

3200
39 - 43
25 - 29
27 - 54
30 - 60
4) Closed throttle (idle) speed up to 1986 = 670-770 rpm.

Engine 102.985 up to 1986 102.985 from 1987
CFI system designation 3 3
Closed throttle ( idle)
Selector lever position/Transmission range
Engine oil temperature °C approx.
Closed throttle (idle) speed rpm
Control range %
Control range °
On-off ratio readout during deceleration fuel shut off %

P/N D
80 80
700 - 800 <750
25 - 31 <28
22 - 28 -
50

P/N D
80 80
700 - 800 <750
36 - 50 <43
31 - 45 -
50
Vacuum mbar
Lambda control ontrol range %
550 - 650
2.1 - 4.8 V 5)
550 - 650
50±10
5) Disconnect oxygen sensor connector. Read control value (Volt). Readout must not oscillate. Reconnect oxygen sensor connector, readout oscillates.
Test value must not deviate more than ±0.8 Volt from the control value.

Engine 102.985
CFI system designation 3
Engine performance 6)

Engine speed rpm
Output, manual transmission, 3rd gear hp
Output, 4-speed AT, transmission range 3 hp


5000
96
94
6) These are minimum performance values. Do not exceed speed of 80 mph.

Check performance only at simulated engine coolant temperature of 80 oC (use 2 resistance substitution units)