Diagnostic Manual, Engines, Volume 4
Hydraulic Test Program - Test (Fuel Pump Test)
 |
 |
Test scope |
Test connection
|
Test condition |
Nominal value |
Possible cause/Remedy 1) |
| 1.0 |
|
Right engine control module (ME-SFI) (N3/12) (only)
Fuel pumps
Delivery capacity |
26
(1.26) |
N3/12
 |
24
(1.24) |
Disconnect fuel return
hose from fuel line and
place end in measuring
glass.
Ignition: ON
|
1 liter of fuel within 35 seconds.
|
Check fuel lines for restrictions
(kinks and dents).
Replace fuel filter,
2.0. |
| 2.0 |
|
Fuel pumps
Current draw
|
|
|
|
Disconnect fuel pump relay
module (K27) and connect multimeter to sockets 1 and 3, see Figure 1
Ignition: ON
|
4 - 9 A |
Fuel pumps. |
1) Observe Preparation for Test, see  33 . |
|
Printable version
