Diagnostic Manual, Info./Comm., Volume 1
Electric Test Program - Preparation for Test
1. Battery voltage 11 - 14 V.
2. Check fuses.
3. Systems and fluid levels in order.
Caution:
To prevent damage to the control modules, the connectors on the control modules must only be removed or installed with the ignition OFF .
Electrical wiring diagrams:
See Electric Troubleshooting Manuals, group 54
|
Conventional tools, test equipment
Description |
Brand, model, etc. |
Multimeter 1)
|
Sun DMM-5
Fluke models 1) 23, 77 III, 87, 88 |
1) Available through the MBUSA Standard Service Equipment Program. |
|