Diagnostic Manual, Info./Comm., Volume 1
Electric Test Program - Preparation for Test
1. Battery voltage 11 - 14 V.
2. Check fuses.
3. Systems and fluid levels in order.
Note:
To prevent damage to the control modules refered to in 23 , the connectors on the control modules must only be removed or installed with the ignition OFF .
Electrical wiring diagrams
See Electric Troubleshooting Manual, Model 129, Volume 1.
|
Equipment
Multimeter 1) |
Fluke models 23, 83, 85, 87 |
Signal generator 1) |
SUN DTR-8416 |
1) Available through the MBUSA Standard Equipment Program. |
|