| Test step/Test
scope |
Test condition |
Nominal value |
Possible cause/Remedy
1) |
| 1.0 Locking vehicle by pointing IR
transmitter at the RCL receiver (interior rearview mirror) (A26/7) or RCL
receiver (roof frame) (A26/9). |
Locking vehicle using IR transmitter.
|
All doors, trunk lid and filler flap
lock
in  3 sec. |
Vehicle does not lock and pump motor
in PSE control module (A37) does not run.
23 PSE 1.0-
8.0,
3.1
23 PSE 1.0-
3.0,
4.5
11 1.0
4.7
11 1.0,
Combination control module (N10-1 or N10-3).
Vehicle does not lock even though pump motor in PSE control module (A37)
runs.
32
2.0,
23 PSE 1.0
|
| 2.0 Unlock vehicle by pointing IR
transmitter at the RCL receiver (interior rearview mirror) (A26/7) or RCL
receiver (roof frame) (A26/9). |
Unlocking vehicle using IR transmitter.
|
All doors, trunk lid and filler flap
unlock
in 3 sec. |
Vehicle does not unlock and pump
motor in PSE control module (A37) does not run.
23 PSE 1.0-
8.0,
3.1
23 PSE 1.0-
3.0,
4.5
11 2.0,
4.7
11 2.0,
Combination control module (N10-1 or N10-3).
Vehicle does not unlock even though pump motor in PSE control module (A37)
runs.
32
1.0,
33 PSE 2.0 |
| 3.0 Locking vehicle via interior
CL switch |
Front doors closed.
Vehicle unlocked via IR transmitter.
Press interior CL switch in direction lock. |
All doors, trunk lid and filler flap
lock
in 3 sec.
|
Vehicle does not lock and pump motor
in PSE control module (A37) does not run.
Pneumatic lines,
23
1.0
Vehicle does not lock even though pump motor in PSE control module (A37)
runs.
32
2.0,
33 PSE 1.0 |
| 4.0 Unlock vehicle via interior CL
switch |
Front doors closed.
Press interior CL switch in direction unlock. |
All doors, trunk lid and filler flap
unlock
in 3 sec. |
Vehicle does not unlock and pump
motor in PSE control module (A37) does not run.
Pneumatic lines,
23
1.0
Vehicle does not unlock even though pump motor in PSE control module (A37)
runs.
32
1.0,
33 PSE 2.0
|
| 5.0 Unlocking vehicle by opening
one of the front doors. |
Vehicle is locked via interior CL
switch.
Opening front door via door handle in interior door panel. |
All doors, trunk lid and filler flap
unlock
in 3 sec.
|
Vehicle does not unlock and pump
motor in PSE control module (A37) does not run.
23
2.0, 3.0
Vehicle does not lock even though pump motor in PSE control module (A37)
runs.
32
1.0,
33 PSE
2.0
|
| 6.0 Unlock vehicle via left front
door lock switch (S86/1) or trunk lid lock switch (S88/2). |
Turn key in lock to the right. |
All doors, trunk lid and filler flap
unlock
in 3 sec. |
Vehicle does not unlock and pump
motor in PSE control module (A37) does not run.
Pneumatic lines,
4.5
23 32.0-33.0,
4.7
23 11.0-12.0,
23 PSE 1.0-8.0,
3.1
23 1.0-3.0,
IR DAS control module (N54/1),
Combination control module (N10-1 or N10-3),
PSE control module (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37)
runs.
32
1.0,
33 PSE
2.0
|
| 7.0 Locking vehicle via left front
door lock switch (S86/1) or trunk lid lock switch (S88/2). |
Turn key in lock to the left. |
All doors, trunk lid and filler flap
lock
in 3 sec.
|
Vehicle does not lock and pump motor
in PSE control module (A37) does not run.
Pneumatic lines,
4.5
23 32.0-33.0,
4.7
23 11.0-12.0,
23 PSE 1.0-8.0,
3.1
23 1.0-3.0,
IR DAS control module (N54/1),
Combination control module (N10-1 or N10-3),
PSE control module (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37)
runs.
32
2.0,
33 PSE 1.0 |
Printable
version
