Diagnostic Manual, Body and Accessories,
Volume 4.1
Diagnosis - Technical Changes
Version start dates/Changes/Innovations (Model 202)
World wide
Manuf.
code |
Model |
LHS1)
RHS1) |
Manuf. plant |
As of chassis number |
Up to
chassis number |
As of
production date |
Up to
production
date |
Type and reason for change |
Reference/ Remarks |
| WDB |
202 |
|
|
|
|
|
12/93 |
Starter lock-out relay (K38) located
on interior A-pillar bottom, activation is via ATA. |
|
| WDB |
202 |
|
|
|
|
01/94 |
|
Starter lock-out relay (K38) located
on left side of dashboard crossmember. Activation on vehicles w/o IRCL via
PSE. On vehicles with IRCL via IRCL control module. |
|
| WDB |
202 |
|
|
|
|
01/94 |
|
On vehicles with IRCL (code 800)
the locknut switch is not installed,
except  |
|
| WDB |
202 |
|
|
|
|
03/94 |
|
Deactivation of the interior motion
sensor no longer via button on left infrared transmitter and receiver (interior
motion system) (A26/4), but instead together with the anti-tow protection
system via switch on the center console. |
|
| WDB |
202 |
|
|
|
|
|
|
Radio contact deleted with introduction
of new radio generation. |
|
Version start dates/Changes/Innovations (Model 202 continued)
World wide
Manuf.
code |
Model |
LHS1)
RHS1) |
Manuf. plant |
As of chassis number |
Up to
chassis number |
As of
production date |
Up to
production
date |
Type and reason for change |
Reference/ Remarks |
| WDB |
202 |
|
|
|
|
09/96 |
|
New interior protection system, the
IR interior motion ATA control module (N26/3) was deleted as a result. |
|
| WDB |
202 |
|
|
|
|
06/97 |
|
ATA was combined into the PSE control
module (A37). |
|
| WDB |
202 |
|
|
|
|
06/98 |
|
Alarm siren with auxiliary battery
(H3/1) replaces the Alarm horn (H3). Optional ATA includes anti-tow protection
system. |
|
| WDB |
202 |
|
|
|
|
06/98 |
|
New infrared interior motion sensor
(One sensor replaces previously used two sensors) |
For sedan only. |
Version start dates/Changes/Innovations (Model 208)
World wide
Manuf.
code |
Model |
LHS1)
RHS1) |
Manuf. plant |
As of chassis number |
Up to
chassis number |
As of
production date |
Up to
production
date |
Type and reason for change |
Reference/ Remarks |
| WDB |
208 |
|
|
|
|
|
|
No interior motion sensor for 208
Cabrio. |
|
| WDB |
208 |
|
|
|
|
06/98 |
|
Alarm siren with auxiliary battery
(H3/1) replaces the alarm horn (H3).
Optional ATA includes anti-tow protection system. |
|
Version start dates/Changes/Innovations (Model 210)
World wide
Manuf.
code |
Model |
LHS1)
RHS1) |
Manuf. plant |
As of chassis number |
Up to
chassis number |
As of
production date |
Up to
production
date |
Type and reason for change |
Reference/ Remarks |
| WDB |
210 |
|
|
|
|
03/97 |
|
ATA has been combined into the PSE
control module (A37)
(complete network), DAS 3 |
With 4-MATIC as of production
start-up. |
| WDB |
210 |
|
|
|
|
06/98 |
|
Alarm siren with auxiliary battery
(H3/1) replaces the Alarm horn (H3). Optional ATA includes anti-tow protection
system. |
|
| WDB |
210 |
|
|
|
|
06/98 |
|
New infrared interior motion sensor
(One sensor replaces previously used two sensors) |
For sedan only. |
| WDB |
210 |
|
|
|
|
06/99 |
|
New infrared interior motion sensor
(One sensor replaces previously used two sensors) |
For wagen only. |
1) LHS: Left hand steering
RHS: Right hand steering |
|
Printable
version
