Preparation for Test: 1. Fuses F1-22, F4-3, F4-7 ok, 2. Connect the Hand-Held Tester (HHT) to X11/4, according to diagram, see section 0. Erasing the Mirror, steering column adjustment, heated mirrors (MSC) DTC memory, will also erase the DTC memory for the Combination Control Module (N10-1) and Convenience Feature (CF).

Actual Value	Possible cause	Test step/Remedy 1)
	Circuit 15R, circuit 15, Left/right front door switch (S17/3, S17/4)	23 2.0 D.M., Body and Accessories Volume 2.1, 5.2 >23> 5.0, 6.0
	Memory store button switch (S91s9), pressed	D.M., Body and Accessories Volume 5, 15.3, >23 >18.0
	Memory button 1 switch (S91s6), recall memory	D.M., Body and Accessories Volume 5, 15.3, > 23 > 18.0
	Memory button 2 switch (S91s7), recall memory	D.M., Body and Accessories Volume 5, 15.3, > 23 > 18.0
	Memory button 3 switch (S91s8), recall memory	D.M., Body and Accessories Volume 5, 15.3, > 23 > 18.0
	Outside rearview mirror-vertical adjustment (S21s6)	23 3.0, 4.0
	Outside rearview mirror-horizontal adjustment (S21s7)	23 3.1, 4.1
	Activation of vertical adjustment motor (M21/4m1, M21/5m1) by combination control module (N10-1)	23 5.0, 11.0
	Activation of horizontal adjustment motor (M21/4m2, M21/5m2) by combination control module (N10-1)	23 6.0, 10.0
	Potentiometer voltage supply for (M21/4m1, m2,M21/5m1, m2)	23 9.0, 14.0
	Memory button 1 switch (S91s6), recall memory	D.M., Body and Accessories Volume 5, 15.3, > 23 > 18.0
	Store memory using memory button 2 switch (S91s7), with memory store button switch (S91s9)	D.M., Body and Accessories Volume 5, 15.3, > 23 > 18.0
	Recall memory, using memory button 2 switch (S91s7)	D.M., Body and Accessories Volume 5, 15.3, >23 >18.0
	Store memory, using memory button 3 switch (S91s8) with memory store button switch (S91s9)	D.M., Body and Accessories Volume 5, 15.3, >23 >18.0
	Recall memory, using memory button 3 switch (S91s8)	D.M., Body and Accessories Volume 5, 15.3, >23 >18.0
	Memory store button switch (S91s9), pressed	D.M., Body and Accessories Volume 5, 15.3, >23 >18.0
	Steering column up/down switch (S91s11)	23 17.1
	Steering column in/out switch (S91s12)	23 17.0
	Activation of tilt adjustment motor (M20/m2) (up/down ) by combination control module (N10-1)	23 19.0
	Activation of telescopic adjustment motor (M20/m1) (in/out) by combination control module (N10-1)	23 18.0
	Tilt adjustment motor (M20m2), defective potentiometer or wiring -//-	23 19.1
	Telescopic adjustment motor (M20m1), defective potentiometer or wiring -//-	23 18.1
	Voltage supply for potentiometer (M20m1, M20m2)	23 18.1, 19.1

1) Observe Preparation for Test, see 22.