Diagnostic Manual, Info./Comm., Volume 1
Diagnosis - Diagnostic Trouble Code (DTC) Memory
Note regarding HHT:
The Instrument Cluster (IC) is tested via the HHT,
the following functions are available:
1. Control module version
2. Diagnostic Trouble Code (DTC) Memory
3. Actual values
4. Activation
5. Version Coding
By pressing the continue button on the HHT, additonal information can be recalled for each test step.
Note regarding version coding:
The following is available in the HHT during version coding:
1.) Read out of version code and transfer to a new spare part instrument cluster.
2.) Read out/change of version code: 1. Motor Version
2. Country Version (miles/kilometer)
3. Optional equipment
(ETS/ASR V)
Note:
Prior to the replacement of a defective instrument cluster, readout and store the version code in the HHT. After installing the instrument cluster, input the previously stored values back into the instrument cluster.
If the readout of stored version codes not possible, the input must be performed manually (by using the menu in the HHT).
The following version codes are to be determined:
1. Motor Version
2. Country Version (miles/kilometer)
3. Optional equipment (ETS/ASR V)
|
|
Printable version
