STI Home

Printable version

LOCATION:

6.1 CD Changer (CDC)   >   23 Electrical Test Program - Test

Test step Test scope Test connection Test condition Nominal value Possible cause/Remedy 1.0 CD changer (A2/6) Voltage supply Terminal 30 Model 202, 208, 210 up to 05/98 Model 124 6 (F) A2/6 4 (D) Remove A2/6. Unplug connector. Measure at connector (Figure 1). Radio: ON 10 - 14 V Wiring, 1.1 1.1 Voltage supply Terminal 15 6 (F) A2/6 5 (E) Remove A2/6. Unplug connector. Measure at connector (Figure 1). Ignition and Radio: ON 10 - 14 V Wiring, A2/6, Values OK: Radio, see 3.1 23 . or AD82.60 in WIS 2.0 CD changer (A2/6) Voltage supply Terminal 30 Model 163 F A2/6 D Remove A2/6 Unplug connector Measure at connector (Figure 2). Radio: ON 10 - 14 V Wiring, 2.1 2.1 Voltage supply Terminal 15 F A2/6 E Remove A2/6. Unplug connector. Measure at connector (Figure 2). Ignition and Radio: ON 10 - 14 V Wiring, A2/6, Values OK: Radio, see 3.1 23 . or AD82.60 in WIS 3.0 CD changer (A2/6) Voltage supply Terminal 30 Model 129, 202, 208, 210 as of 06/98 1 A2/6 2 Remove A2/6. Unplug connector. Measure at connector (Figure 3). Radio: ON 10 - 14 V Wiring, Radio AD82.60 in WIS 4.0 CD changer (A2/6) Command functions           Remove A2/6. Unplug connector and reconnect again Ignition and Radio: ON Command functions again possible Wiring, A2/6,