STI Home
Diagnostic Manual, Body and Accessories,
Volume 1

 Printable version
LOCATION:    2.2 Combination Control Module   >   13 Diagnosis - Complaint Related Diagnostic Chart (Windshield Wiper System)


Diagnosis - Complaint Related Diagnostic Chart (Windshield Wiper System)

Preparation for Test:
1. Battery voltage 11 to 14 V
2. Fuses ok.
3. Voltage supply to AAM is OK.

Complaint/Problem Possible cause Test step/Remedy
Front windshield wiper system does not function. Combination switch (S4)
Wiper motor (M6/1)
23a 1.0,
23a 5.0,
Wiring.
Front windshield wiper system does not function in wash mode. Wiper motor (M6/1) 23a 5.0
Washer pump does not function during wash function. Windshield washer pump (M5/1) 23a 6.0
Front windshield wiper system does not function in wipe stage 1 or stage 2 Combination switch (S4)
Wiper motor (M6/1)
23a 1.0,
23a 5.0
Front windshield wiper system does not function in interval wipe mode. Combination switch (S4)
All Activity Module (N10)
23a 3.0
Front windshield wiper does not stop in park position when turned OFF Cam switch in wiper motor (M6/1) 23a 4.0
Rear window wiper system does not function Rear window wiper/washer switch (S78)
All Activity Module (N10)
23a 9.0
Rear window wiper does not function Rear window wiper/washer switch (S78)
Tailgate window wiper motor (M6/4)
23a 9.0,
23a 10.0
Rear window wiper does not function when in wash mode Rear window wiper/washer switch (S78) 23a 9.0
Rear window wiper does not turn OFF Relay on tailgate window wiper motor (M6/4)
Cam switch
23a 8.0,
Wiring.
Rear window wiper does not complete one wipe cycle Cam switch on tailgate window wiper motor (M6/4) 23a 8.0
Rear window washer pump (M5/3) does not function during the wash rear window mode Rear window wiper/washer switch (S78)
Rear window washer pump (M5/3)
23a 9.0,
23a 7.0

Preparation for Test:
1. Fuses ok.
2. Battery voltage 11 to 14 V
3. Voltage supply to AAM is OK.
4. Interior lamps functional.

Complaint/Problem Possible cause Test step/Remedy
Interior Lighting does not function. Wiring. Circuit 30, voltage supply
Interior lighting does not turn OFF when ignition is turned ON,
or does not turn ON when ignition is turned OFF.
All Activity Module (N10). N10
Functional problems when in "Automatic ON" mode,
i.e. when opening doors:
   
When opening one of the front doors, the entire interior lighting system does not come ON. Left front door rotary tumbler microswitch (S87/7),
Right door rotary tumbler microswitch (S87/6),
All Activity Module (N10).
23b 4.0,
Wiring,
N10
When opening one of the rear doors, the rear interior lighting does not come ON. Left rear door rotary tumbler microswitch (S87/2),
Right rear door rotary tumbler microswitch (S87/3),
All Activity Module (N10).
23b 5.0,
Wiring,
N10
When opening the front doors, the front dome lamp (with shut-off delay and front reading lamp) (E15/2) does not come ON. Front dome lamp (with shut-off delay and front reading lamp) (E15/2). 23b 1.0,
E15/2
Left rear dome lamp (E15/8) does not come ON when opening the doors. Left rear dome lamp (E15/8),
All Activity Module (N10).
If E15/9 ok, then check:
23b 2.0
Right rear dome lamp (E15/9) does not come ON when opening the doors. Right rear dome lamp (E15/9),
All Activity Module (N10).
If E15/8 ok, then check:
23b 2.0
Functional problems of individual interior lamps when in "Automatic ON" mode or with manual ON mode:    
Front dome lamp (with shut-off delay and front reading lamp) (E15/2) does not function. Front dome lamp (with shut-off delay and front reading lamp) (E15/2). Wiring,
E15/2
Left rear dome lamp (E15/8) does not function. Left rear dome lamp (E15/8). Wiring,
E15/8
Right rear dome lamp (E15/9) does not function. Right rear dome lamp (E15/9). Wiring,
E15/9
Interior lamps do not illuminate when unlocking vehicle via central locking mode.   If central locking functions ok:
Wiring,
N10
Functional problem with rear dome lamp (E15/3):    
Rear dome lamp (E15/3) does not function Rotary tumbler/trunk lid microswitch (S88/1),
Rear dome lamp (E15/3)
23b 3.0,
23b 6.0

Preparation for Test:
1. Battery voltage 11 to 14 V
2. Fuses ok.
3. Voltage supply to AAM is OK.
4. Convenience Feature (CF) is functional.

Complaint/Problem Possible cause Test step/Remedy
Heated rear window does not function. Heated rear window switch (S21s9),
All Activity Module (N10).
23c 2.0,
Wiring,
N10
Heated rear window does not function, however the indicator lamp is illuminated. Rear window defroster element (R1),
Rear window defroster relay (F1k1),
Antenna splitter (A2/5).
23c 1.0
Heated rear window functions, however the indicator lamp is not illuminated. Convenience Feature (CF),
Heated rear window indicator lamp (S21e2)

23c 3.0,
Wiring.
Automatic shut-off of heated rear window does not function. All Activity Module (N10) Heated rear window shuts OFF after 12 minutes, if OK:
N10