|
Preparation for recalling actual values:
1. Connect the Hand-Held Tester (HHT) to X11/4, according to diagram,
see section 0,
2. Voltage supply to control modules and CAN data lines ok, see
DM, B&A, Vol. 2.1, section 7.1,
>23,
3. Review section: C/1,
12,
13,
20,
21,
22,
31,
4. Battery voltage >11 V,
5. Ignition: ON
6. All CAN data lines must be connected,
7. Fuses ok.
Actual values for the system being checked may be located in other
control modules, therefore it is important to check the DTC memory
on all control modules that are relevant to the system being checked.
When calling up actual values, all actual values will appear for
that particular control module.
Erasing the Mirror, steering column adjustment, heated mirrors (MSC) DTC
memory, will also erase the DTC memory for the Combination Control Module
(N10-1) and Convenience Feature (CF).
Abreviations:
  
 Left seat adjustment
  
Lower control field control module (N72)
 
 Front driver-side door control module
(N69/1)
 Front passenger-side door control
module (N69/2)
The above noted abreviations are in the second column of the following
actual values tables in bold type to advise of hints (regarding
in which of the control modules the actual values or activations are stored).
|
 |
 |
 |
Test scope |
Test connection |
Test condition |
Nominal value |
Possible cause/Remedy |
| 1.0 |
      
   |
Low voltage
|
|
> 10V
<10 V |
|
See
DM, B&A, Vol. 2.1, section 7.1,
>23 |
| 2.0 |
|
Excessive voltage
|
|
< 15.5 V
> 15.5 V |
|
See
DM, B&A, Vol. 2.1, section 7.1, >23 |
| 3.0 |
|
Outside rearview mirror-vertical
horizontal adj. (N72s6, N72s7)
Left outside mirror
|
|
Set outside rearview mirror-left/right
(N72s8) to driver-side mirror (left) and adjust mirror:
Up adjustment:
Down adjustment:
Left adjustment:
Right adjustment: |
  
 
|
Lower control field control module
(N72). |
| 4.0 |
|
Outside rearview mirror-vertical
horizontal adj. (N72s6, N72s7)
Right outside mirror
|
|
Set outside rearview mirror-left/right
(N72s8) to passenger-side mirror (right) and adjust mirror:
Up adjustment:
Down adjustment:
Left adjustment:
Right adjustment: |
|
Lower control field control module
(N72). |
| 5.0 |
|
Outside rearview mirror-left/right
(N72s8) |
|
Set outside rearview mirror-left/right
(N72s8) to:
Left mirror
Right mirror |
|
Lower control field control module
(N72). |
| 6.0 |
|
Right outside rearview mirror
"Park-position" |
|
Engage reverse gear using selector
lever:
Reverse gear engaged:
Reverse gear not engaged: |
|
Wiring,
Starter lock-out/back-up lamp switch (S16/1),
Back-up lamp switch (S16/2),
Starter lock-out/back-up lamp switch (transmission range recognition) (S16/3).
|
| 7.0 |
|
Left/right outside mirror adjustments
(M21/6m1, M21/6m2
M21/7m1, M21/7m2) |
|
Press outside rearview mirror-vertical/horizontal
adjustment (N72s6, N72s7) to:
Up adjustment:
Down adjustment:
Left adjustment:
Right adjustment: |
|
Wiring,
Front driver-side door control module (N69/1),
Passenger-side door control module (N69/2).
|
| 8.0 |
|
Vertical/horizontal adjustment
motor(M21/6m1, M21/7m1) (left/right)
Potentiometer |
|
Press outside rearview mirror-vertical/horizontal
adjustment (N72s6, N72s7) to:
Up adjustment,
Down adjustment,
Left adjustment,
Right adjustment.
|
Values change as adjustments are made.
|
Wiring,
Vertical adjustment motor (M21/6m1),
Vertical adjustment motor
(M21/7m1). |
| 9.0 |
|
Vertical/horizontal adjustment
motor(M21/6m2, M21/7m2) (left/right)
Potentiometer |
|
Press outside rearview mirror-vertical/horizontal
adjustment (N72s6, N72s7) to:
Up adjustment,
Down adjustment,
Left adjustment,
Right adjustment.
|
Values change as adjustments are made.
|
Wiring,
Vertical adjustment motor (M21/6m2),
Vertical adjustment motor
(M21/7m2). |
| 10.0 |
  
  |
Steering column up/down switch
(S91/2s11)
(Model 210 only) |
|
Press steering column up/down switch
(S91/2s11) to:
Up adjustment:
Down adjustment: |
|
Wiring,
S91/2s11
|
| 11.0 |
|
Steering column in/out switch
(S91/2s12)
(Model 210 only) |
|
Press steering column in/out switch
(S91/2s12 ) to:
In adjustment:
Out adjustment: |
|
Wiring,
S91/2s12
|
| 12.0 |
|
Telescopic adjustment motor (M20m1)
(in/out)
Potentiometer
(Model 210 only) |
|
Press steering column in/out switch
(S91/2s12 ) to:
Out adjustment:
In adjustment:
|
Raising values, steering column extends.
Falling values, steering column retracts. |
Wiring,
(M20m1). |
| 13.0 |
|
Tilt adjustment motor (M20m2)
(up/down)
Potentiometer
(Model 210 only) |
|
Press steering column up/down switch
(S91/2s11) to:
Up adjustment:
Down adjustment:
|
Raising values, steering column raises.
Falling values, steering column drops.
|
Wiring,
(M20m2). |
|
Printable
version
