Diagnostic Manual, Chassis and Drivetrain,
Volume 1
| LOCATION: |
1.2 Base Module > 22 Electrical Test Program - Preparation for Test |
Electrical Test Program - Preparation for Test
Preliminary work:
Diagnosis - Diagnostic Trouble Code (DTC) Memory  11 |
1. Ignition: OFF
2. Disconnect base module (BM, N16/1).
3. Connect socket box with contact module 1 and contact box according to connection diagram (Figure 1 or 2) on following pages.
Wiring Diagrams
Electrical Troubleshooting Manual, Model 129
Electrical Troubleshooting Manual, Model 140
|
Equipment
| Digital multimeter 1) |
Fluke model 23, 83, 85, 87 |
| 1) Available through the MBUSA Standard Equipment Program. |
|
Printable version
