Diagnostic Manual, Engines, Volume 4
| LOCATION: |
9.6 ME - SFI (ME1.0) > 31 Hydraulic Test Program - Preparation for Test (Fuel System Pressure and Internal Leakage Test) |
Hydraulic Test Program - Preparation for Test (Fuel System Pressure and Internal Leakage Test)
 WARNING!
Risk of severe injury when touching ignition parts which produce high voltages. Do not touch igntion components.
Persons with heart pacemakers are not to perform repairs on this type of ignition system. .
WARNING!
Risk of fatal injury from being pulled into rotating vehicle parts.
Do not reach into rotating parts.
Wear closed and tight-fitting work clothes.
Protect vicinity of rotating vehicle components from unauthorized access.
WARNING!
Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.
No fire, sparks, exposed flames or smoking.
Pour fuels only into suitable and appropriately marked containers.
Wear protective clothing when handling fuel.
Preparation for Test
1. Review  11 , 21 , 22 , 23 , 24 , 31 , 33 ,
2. Review section 0,
3. Connect pressure gauge to test connection.
4. After completing test, using measurement glass (055), release
fuel pressure and allow residual fuel to drain into glass (see Figure 1).
|
 |
 |
|
Printable version
