Diagnostic Manual, Diesel Engines,
Volume 1.1
B 6 Fuel Pump Test
|
Operation No. of Text
Description and Time Allowance 07-5701
|
Test Steps
| 1
|
Test equipment
|
connect/disconnect according
to connection diagram.
|
|
2.1
|
Fuel line (70/6) on fuel
filter and on electrohydraulic
shut off actuator (Y1/1)
|
disconnect and connect test line (A) between fuel filter and electrohydraulic
shut-off actuator (Y1/1).
Place end of test line into measuring glass and check fuel quantity
(see Test and Adjustment Data, section A).
|
| 3
|
Engine running at
CTP
|
measure over flow quantity
after 30 seconds
|
| 4
|
Delivery quantity
|
check (see Test and Adjustment
Data, section A).
|
For quick bleeding of the fuel injection system, plug end of test line
until engine runs.
|
|
Conventional tools, test equipment
|
| Description
|
Brand, model, etc.
|
| Engine analyzer
1)
|
Bear DACE
|
| Measuring glass (at least 1 liter)
|
|
| Stop watch
|
|
|
1) Available through the
MBUSA Standard Equipment Program.
|
|
Printable version
