Diagnostic Manual, Diesel Engines,
Volume 1.1
B 8 Automatic Transmission Vacuum Control Valve Test and Adjustment
Operation No. of Text
Description and Time
Allowance 27-0035 or 27-0037 or 27-0038
|
Test Conditions
| 1
|
Vacuum tester (019) on vacuum control
valve (65) with Y-fitting
|
connect, disconnect
|
| 2
|
Run engine at
CTP
: Vacuum
|
> 400 mbar
|
| 3
|
Turn engine off, move throttle linkage
to full load
|
0 mbar
|
| 4
|
Vacuum control valve
|
adjust by loosening nuts (65/1),
move throttle linkage to full load position and turn vacuum control valve
clockwise against throttle linkage. Tighten nuts (65/1).
|
|
Printable version
