STI Home

Printable version

LOCATION:

9.4 ME - SFI (ME2.0)   >  34 Hydraulic Test Program - Test (Fuel Pump Test)

Test scope Test connection Test condition Nominal value Possible cause/remedy 1) 1.0   Fuel pump Delivery capacity 3 (3A) N3/10 21 (29C) Disconnect fuel return hose from fuel line and place end in measuring glass. Ignition: ON 1 liter of fuel within 35 seconds. Check fuel lines for restrictions (kinks and dents). Replace fuel filter or fuel pressure regulator, check current draw (2.0 below). 2.0   Fuel pumps Current draw   Remove FP relay module (K27), located under right rear seat, connect multimeter on sockets 2 and 8. Ignition: ON 4 - 9 A Fuel pump. 1) Observe Preparation for Test, see 33 .