| Complaint/Problem |
Possible cause |
Test step/Remedy 1) |
| Indicator lamp in power soft top
switch (S84) does not light when switching ignition on |
Control module (N52)
Indicator lamp in power soft top switch (S84)
|
23  1.0
23
35.0, 36.0
|
Indicator lamp in power soft top
switch (S84) lights with soft top closed (no DTC's)
(Warning tone sounds for approx. 10 sec. while driving) |
Soft top fabric bow "locked" switch
(S84/8)
Left front soft top "locked" switch (S84/1)
Right front soft top "locked" switch (S84/2) |
23 8.0
23
11.0
23
12.0
|
Indicator lamp in power soft top
switch (S84) lights with soft top open (no diagnostic trouble codes)
(Warning tone sounds for approx. 10 sec. while driving) |
Soft top compartment cover "locked"
switch (A25/1s2)
Left front soft top "locked" switch (S84/1)
Right front soft top "locked" switch (S84/2) |
23 5.0
23
11.0
23
12.0
|
| Indicator lamp in power soft top
switch (S84) blinks when actuated |
Diagnostic Trouble Code being stored
in memory |
Read out DTC's
12/1
|
| Roll bar cannot be extended using
RB switch (S83) |
CST/RB hydraulic unit (A7/5) malfunction
RB switch (S83)
RB "extended" switch (S83/6)
RB piston side valve (Y57y11)
System pressure
Roll bar extended
|
23 1.0, 2.0
23
20.0
23
16.0
23
23.0
33
1.0
33
4.0
|
| Roll bar cannot be extended using
rear seat RB switch (rear center console) (S83/4) |
RB switch (rear center console) (S83/4)
Rear power window safety switch (S21/7)
|
23 20.0
23
22.0 |
Roll bar cannot be extended using
power soft top
switch (S84) |
RB piston side valve (Y57y11)
System pressure
Roll bar extended
|
23 23.0
33
1.0
33
4.0 |
| Roll bar cannot be retracted using
RB switch (S83) |
CST/RB hydraulic unit (A7/5) does
not run
RB switch (S83)
RB "retracted" switch (S83/5)
RB rod side valve (Y57y10)
Roll bar retracted
|
23 1.0, 2.0
23
20.0
23
15.0
23
21.0
33
3.0 |
| Roll bar cannot be retracted using
RB switch (rear center console (S83/4) |
RB switch (rear center console) (S83/4)
Rear power windows safety switch (S21/7)
|
23 20.0
23
22.0 |
Roll bar cannot be retracted using
power soft top
switch (S84) |
CST/RB hydraulic unit (A7/5) does
not run
Power soft top switch (S84)
RB "retracted" switch (S83/5)
RB rod side valve (Y57y10)
Roll bar retracted
|
23 1.0, 2.0
23
18.0
23
15.0
23
21.0
33
3.0 |
| Side windows do not open at start
of soft top operation |
Voltage supply to CF control module
(N57)
CF control module (N57)
|
23 33.0 |
| Side windows do not close at end
of soft top operation (Front latches must be locked) |
Soft top compartment cover "locked"
switch (A25/1s2)
Voltage supply to CF control module (N57)
CF control module (N57) |
23 5.0
23
33.0 |
| Heated rear window does not shut
off with soft top open |
Soft top "overhead" switch (S84/4)
Voltage supply to combination relay (heated rear
window) (N10)
|
23 14.0
23
32.0 |
| Soft top can be opened or closed
while driving (front latches unlocked). No warning tone from the soft top
control panel. |
Vehicle speed signal from Hall-effect
sensor multipoint connector (X53/5)
Power soft top control module (N52)
|
23 19.0, 34.0 |
| No centralized closing of side windows
after pressing power soft top switch (S84) in closing direction twice
|
Power soft top switch (S84)
Voltage supply to CF control module (N57)
CF control module (N57)
|
23 18.0
23
33.0 |
| No centralized opening of side windows
after pressing power soft top switch (S84) in opening direction twice
|
Power soft top switch (S84)
Voltage supply to CF control module (N57)
CF control module (N57)
|
23 18.0
23
33.0 |
Printable
version
