Diagnostic Manual, Chassis and Drivetrain,
Volume 1
Electrical Test Program - Preparation for Test
1. Review sections:  11, 12, 21, 22 entirely,
1. Ignition: OFF,
2. Remove ETC control module (N15/3),
3. Connect socket box and test cable according to connection diagram on following pages: 22/2 through 22/7,
4. Review 21 entirely before performing the electrical testing in 23
Electrical wiring diagrams, location of grounds and connectors:
Wiring Diagrams:
Group 27 of respective Electrical Troubleshooting Manual (ETM)
|
Test equipment; See MBUSA Standard Service Equipment Program
| Description |
Brand, model, etc. |
| Digital multimeter |
Fluke models 23, 77 III, 83, 85, 87 |
|
Printable version
