STI Home

Printable version

LOCATION:

9.5 ME - SFI (ME1.0)   >  34 Hydraulic Test Program - Test (Fuel Pump Test)

Test scope Test connection Test condition Nominal value Possible cause/Remedy 1) 1.0   Fuel pumps Delivery capacity 26 (1.26) N3/10 24 (1.24) Disconnect fuel return hose from fuel line and place end in measuring glass. Ignition: ON 1 liter of fuel within 35 seconds. Check fuel lines for restrictions (kinks and dents). Replace fuel filter, 2.0 2.0   Fuel pumps Current draw Connect multimeter to sockets 1 and 3 (Figure 1)   Disconnect fuel pumps relay module (K27). Ignition: ON 4 - 9 A Fuel pumps 1) Observe Preparation for Test, see 33 .