| Test step/Test scope |
Test condition |
Nominal value |
Possible cause/Remedy 1) |
| 1.0 Locking vehicle by pointing IR transmitter at the RCL receiver (roof frame) (A26/9) or via the IR receivers in the doors (A26/1, A26/2). |
Locking vehicle using transmitter key. |
All doors and filler flap lock
in  3 sec. |
Vehicle does not lock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect: see 3.4 PSE C/2,
PSE (A37),
Vehicle does not lock even though pump motor in PSE control module (A37) runs:
4.9  12,
32 PSE/CL  2.0,
32 PSE/CL 4.0,
32 PSE/CL 6.0,
32 PSE
33 PSE 3.0
33 PSE 5.0 |
| 2.0 "Selective" unlocking of the vehicle by pointing the IR transmitter at the RCL receiver (roof frame) (A26/9) or via the IR receivers in the doors (A26/1, A26/2). |
Select "selective" opening.
Unlocking vehicle using transmitter key. |
All doors, trunk lid and filler flap unlock
in 3 sec. |
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
Wiring,
PSE version coding incorrect, see 3.4 PSE C/2,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
23 PSE/CL 1.0,
4.9 12,
32 PSE/CL 1.0,
32 PSE/CL 5.0,
33 PSE 2.0
33 PSE 6.0
|
| 3.0 "Global" unlocking of the vehicle by pointing the IR transmitter at the RCL receiver (roof frame) (A26/9) or via the IR receivers in the doors (A26/1, A26/2). |
Select "global" opening.
Unlocking vehicle using transmitter key. |
All doors, trunk lid and filler flap lock
in 3 sec.
|
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
Wiring,
PSE version coding incorrect, see 3.4 PSE C/2
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
23 PSE/CL 1.0,
4.9 12,
32 PSE/CL 1.0,
32 PSE/CL 3.0,
32 PSE/CL 5.0,
32 PSE
33 PSE 4.0
33 PSE 6.0
|
| 4.0 Lock vehicle via interior switch (CL) |
Unlock vehicle via IR transmitter.
Press interior switch in direction: Lock |
All doors lock in 3 sec.
Fuel filler flap does not lock. |
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect, see 3.4 PSE C/2,
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs.
23 PSE/CL 1.0,
32 PSE/CL 2.0,
32 PSE/CL 4.0,
33 PSE 1.0
33 PSE 3.0
|
| 5.0 Unlock vehicle via interior switch (CL) |
Press interior switch in direction: Unlock |
All doors unlock in 3 sec.
|
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect, see 3.4 PSE C/2,
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
23 PSE/CL 1.0,
32 PSE/CL 1.0,
32 PSE/CL 3.0,
33 PSE 2.0
33 PSE 4.0
|
| 6.0 Unlock vehicle by opening one of the front doors. |
Select "selective" opening.
Vehicle locked via interior switch.
Open one of the front doors via door interior handle. |
Door which was unlocked via door interior handle, unlocks. |
Vehicle unlocks at all doors and the PSE control module (A37) runs:
Transmitter key,
PSE (A37).
|
| 7.0 Unlock vehicle by opening one of the front doors. |
Select "global" opening.
Vehicle locked via interior switch.
Open one of the front doors via door interior handle. |
All doors unlock in 3 sec. |
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect, see 3.4 PSE C/2,
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
23 PSE/CL 2.0,
32 PSE/CL 1.0,
32 PSE/CL 3.0,
32 PSE
33 PSE 4.0
|
8.0 Unlock vehicle via lock switch on front door or trunk lid lock switch
(only   ). |
Turn mechanical key in front door lock switch or trunk lid lock switch towards unlock. |
All doors, trunk lid and filler flap unlock
in 3 sec. |
Vehicle does not unlock and pump motor in PSE control module (A37) does not run:
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
4.9 23,
32 PSE/CL 1.0,
33 PSE 2.0
|
9.0 Lock vehicle via lock switch on front door or trunk lid lock switch
(only ). |
Turn mechanical key in front door lock switch or trunk lid lock switch towards unlock. |
All doors, trunk lid and filler flap lock
in 3 sec. |
Vehicle does not lock and pump motor in PSE control module (A37) does not run:
Wiring,
PSE (A37).
Vehicle does not lock even though pump motor in PSE control module (A37) runs:
4.9 23,
32 PSE/CL 2.0,
33 PSE 1.0
|
| 10.0 Subsequent locking of vehicle via remote central locking (RCL). |
Remove ignition key.
Lock vehicle via RCL.
Unlock vehicle via RCL.
Do not open any doors within 40 seconds.
Do not press interior switch (CL).
|
All doors and filler flap lock. |
Vehicle does not lock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect, see 3.4 PSE C/2,
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
23 PSE/CL 2.0,
23 PSE/CL 3.0,
23 PSE/CL 4.0,
23 PSE/CL 5.0,
32 PSE/CL 2.0,
32 PSE/CL 4.0,
32 PSE/CL 6.0,
33 PSE 1.0
33 PSE 3.0
33 PSE 5.0
|
| 11.0 Automatic locking of vehicle via remote central locking (RCL). |
"Automatic locking activated".
Drive vehicle with a speed of 9mph.
The "Automatic locking" feature should not have been deactivated via the CL interior switch (S6s1) or via the HHT. |
All doors lock.
Fuel filler flap does not lock. |
Vehicle does not lock and pump motor in PSE control module (A37) does not run:
PSE version coding incorrect, see 3.4 PSE C/2,
Wiring,
PSE (A37).
Vehicle does not unlock even though pump motor in PSE control module (A37) runs:
32 PSE/CL 2.0,
32 PSE/CL 4.0,
33 PSE 1.0
33 PSE 3.0
|
Printable version
