Preparation for Test: 1. Review WARNING! on pages 11/1 and 11/2, 2. Review 11 , 21 , 22 , 23 , 24 , 31 , 33 , 3. Review section 0, 4. Connect socket box to engine control module (N3/10).

		Test scope	Test connection			Test condition	Nominal value	Possible cause/remedy 1)
1.0		Fuel pump Delivery capacity	3 (3A)	N3/10	21 (29C)	Disconnect fuel return hose from fuel line and place end in measuring glass. Ignition: ON	1 liter of fuel within 35 seconds maximum.	Check fuel lines for restrictions (kinks and dents), Replace fuel filter, 34
1.1		Fuel pumps Current draw				On Models 129, 140 and 202: disconnect fuel pump relay module and connect multimeter to sockets 1 and 3 (Figure 1). On Model 210: disconnect connector B from FP relay module (K27) and connect multimeter to sockets 1 and 3. Ignition: ON	5 - 9 A	Fuel pump

1) Observe Preparation for Test, see 31 .